Klemm KR701 Rig

These fully hydraulic, purpose built piling rigs are designed and built for the installation of Continuous Flight Auger Bored Piles to a maximum diameter of 450mm and Open Auger Bored Piles, using both temporary and permanent casing, up to a maximum auger diameter of 450mm and maximum casing diameter of 340mm, bored by a mast mounted rotary head delivering a torque of up to 15,000Nm.

The hydraulic mast can be extended / retracted to permit piles to be installed in very limited head room. The rig is powered by a hydraulic power pack that is towed behind the rig, but can be located up to 25m from the rig during pile installation and up to 3m height difference.

The rig has a raking mast which ensures that the rig can be tracked under limited headroom to a working area.

Klemm KR701

Contact Information

Email: Chris Downs
Call: 0845 6308993


Download the Klemm KR701 Technical Datasheet
NCE1002018 GEAwards2018 SpecialistsAwards2018 CNAwards2018

Terms of Use | Privacy Policy
Copyright 2014 Van Elle Limited. Registration No:2590521. Registered Office: Kirkby Lane, Pinxton, Nottinghamshire, NG16 6JA. Registered in England.